APC Smart-UPS C 1500VA LCD 120V
APC Smart-UPS, 900 Watts / 1500 VA, Input 120V / Output 120V , Interface Port USB

Brings Smart-UPS reliability to entry-level applications.

APC Smart-UPS C is ideal for small and medium businesses looking to protect entry-level servers and networking equipment from power disturbances and outages. APC Smart-UPS C features pure sine wave output on battery, simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. LCD status display provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs. Most Smart-UPS C models can be installed in either a tower or rack configuration, allowing standardization across multiple applications. Built on the same standards as the award-winning Smart-UPS, with over 10 million installed, Smart-UPS C provides the basic features and manageability needed to protect entry-level applications.

Features & Benefits:

Runtime Chart:

Click here to view the Smart-UPS Entry Level Runtime Chart. (pop-up window)

Technical Specifications:

Output
Output Power Capacity	900 Watts / 1500 VA
Max Configurable Power	900 Watts / 1440 VA
Nominal Output Voltage	120V
Output Voltage Distortion	Less than 5% at full load
Output Frequency (sync to mains)	50/60Hz +/- 3 Hz
Topology	Line Interactive
Waveform Type	Sine wave
Output Connections	(8) NEMA 5-15R
Input
Nominal Input Voltage	120V
Input Frequency	50/60 Hz +/- 3 Hz (auto sensing)
Input Connections	NEMA 5-15P
Cord Length	6 feet (1.83 meters)
Input voltage range for main operations	93 - 130V
Input voltage adjustable range for mains operation	85 - 136V
Batteries & Runtime
Battery Type	Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof
Typical recharge time	3 hour(s)
Replacement Battery	RBC6
RBC™ Quantity	1
Runtime Graph	Hover over the line on the graph above to view the runtime at any desired load Curve fit to measured runtime data. All measurements taken with new, fully charged batteries, at typical environmental conditions, with no electrical input and balanced resistive load (PF = 1.0) output.
Energy Use/Efficiency
Load Efficiency 25% 95.2% 50% 97.1% 75% 97.6% 100% 97.7%	Hover over the line on the graph above to view the efficiency at any desired load Curve fit to measured runtime data. All measurements taken with new, fully charged batteries, at typical environmental conditions, with no electrical input and balanced resistive load (PF = 1.0) output.
Communications & Management
Interface Port(s)	USB
Control panel	Multi-function LCD status and control console
Audible Alarm	Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)	Optional
Surge Protection and Filtering
Surge energy rating	455 Joules
Filtering	Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical
Maximum Height	8.62 inches (219 mm)
Maximum Width	6.73 inches (171 mm)
Maximum Depth	17.28 inches (439 mm)
Net Weight	45.00 lbs. (20.45 kg)
Shipping Weight	50.00 lbs. (22.73 kg)
Shipping Height	14.80 inches (376 mm)
Shipping Width	12.91 inches (328 mm)
Shipping Depth	23.43 inches (595 mm)
Color	Black
Units per Pallet	24.00
Environmental
Operating Environment	32 - 104°F (0 - 40°C)
Operating Relative Humidity	0 - 95%
Operating Elevation	0-10000 feet (0-3000 meters)
Storage Temperature	5 - 113 °F (-15 - 45 °C)
Storage Relative Humidity	0 - 95%
Storage Elevation	0-50000 feet (0-15000 meters)
Audible noise at 1 meter from surface of unit	45.00 dBA
Online Thermal Dissipation	135.00 BTU/hr
Conformance
Regulatory Approvals	CSA,NOM,UL 1778
Standard Warranty	2 years repair or replace
Equipment protection policy	Lifetime: $150000
Environmental Compliance	RoHS 7b Exemption,REACH: Contains No SVHCs

Documentation:

Download the APC SmartUPS C SMC1000/1500 Data Sheet (PDF).